How to choose a good steel ball slide?　

The selection of the rail can be carried out by selecting the better quality ball rail through the following tests:

1. When buying a steel ball slide, we must first look at the appearance of the slide rail, see whether the surface treatment of the product is good or not, and whether there are traces of rust.

2. Look at the smoothness and structure of the steel ball slide, hold the fixed rail of the slide, and then tilt 45 degrees to see if it can automatically slide to the end (some short size slides cannot be automatically slid because of lack of weight, which is a normal phenomenon), if it can slide to the end, the smoothness of the slide rail is still OK. Then pull the slide rail to the very end, one hand to hold the fixed rail, the other hand to hold the movable rail, swaying up and down from side to side, so as to test the structure and workmanship of the slide rail is strong, it is best to choose to shake the smaller slide rail.

3. Look at the thickness of the material used in the slide rail, and the material thickness we generally use in WALITON is 1.2/1.2/1.5mm in time 1.0/1.0/1.2mm, and the material used in the steel ball slide rail is basically cold-rolled steel plate, as well as stainless steel material. When purchasing, it is best to use stainless steel slides in wet places such as bathroom cabinets, and the general drawers use cold-rolled steel slides on the line.

4. The quality certification of the slide rail (such as how many times SGS can pass the authoritative quality inspection and certification) and the safety guarantee promised by the manufacturer.

These are the things I should pay attention to when I share with you when buying steel ball slides, and I hope that everyone can buy good steel ball slides.