Linear guides can be used in a given direction to do reciprocating linear motion, if according to its conflict nature, then it can be divided into sliding conflict guide, rolling conflict guide, elastic conflict guide and so on. There is usually a poor cloud condition during operation. In particular, some domestic guide rail clearance is relatively large, the guide rail will swing to the side, so that the slide will form a bad noise, therefore, the technical staff must maintain a high degree of vigilance against the "fault signal" of the linear guide bearing, it is best to use hearing to identify it. With the continuous addition of demand in the linear guide market, there are many advanced products in China, and its demand is also rising, and it is necessary to avoid problems with linear guides in the process of operation, however,

The linear guide needs to be regularly operated to avoid rust and coated with high-quality mineral oil before operation.

So how should the linear guide be dustproof? 1. The special telescopic dust cover is used in places with harsh environments, and some models are equipped with special soft telescopic dust cover and special dust cover. For details and instructions on sealing gasket markings, please refer to the corresponding optional accessories (dust protection) items for each product. In addition, when it is necessary to use in an environment that is susceptible to the impact of chip and splashing of cutting fluids, it is recommended to use a soft circular telescopic hood to protect the entire system, or to use a large telescopic dust cover two, a special sealing gasket for linear motion systems to improve dust resistance, a sealing gasket made of special synthetic rubber with high wear resistance in each linear rail system, as well as accessories such as (cascading contact scrapers, etc.) and cleaning rings. Slide rail manufacturer Wanli Hengtong