The general industry knows that the cost of imported machine tools is much higher than that of domestic production. This is due, first, because there is a problem of tariffs on imports, and second, because the original line rails of this product are relatively good. However, with the development of the domestic mechanization industry, the quality of domestic production of wire rails is also good. However, if the working accuracy and stability of this rail are better, special attention should be paid to when using and installing.

1. Precautions for protective measures

1, pay attention to the outside world to produce rust, such as direct contact with human skin, or the external humidity is high 2, be sure to regularly choose high-quality mineral oil for wiping protection.

3, pay attention to dustproof, more dust, will affect the accuracy of the normal operation of the machinery.

Second, installation precautions

Be sure to use special tools, the rail can not be affected by the outside world. And when installing and using, be sure to avoid wiping it with a staple fiber rag, which may damage the product itself. If the installation process is found to be not very obedient to the machinery, do not hammer the way to make it and the machinery uniform, it will cause unpredictable damage.

The wire rail is seen more on the machine tool, and the machine tool itself does not seem to be so delicate, but it must be careful enough to treat the wire rail. After all, tools or machinery for meticulous work are themselves to be treated with special care and practicality. In addition, this product can not withstand the outside world is too humid environment, but also do not forget to regularly protect mineral oil.